Installing a Compaq CPQS tape drive
To install a Compaq CPQS tape drive:
Enter the target ID of the tape drive and the
base I/O address, DMA channel, and
interrupt vector values set on the controller card. Select
the default parameters if you have not altered the settings
on the card.
Quit from the configuration menu to create the
The installation script prompts you to change the
if you want to alter the configuration settings
used for the tape device at boot time. See the
manual page for details.
You can now relink the kernel and reboot to use the tape drive.
You can defer relinking if you have other devices to configure.
Changing the default tape drive
Installing a QIC-40/80 floppy tape drive
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003